Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
6.1. Carburetor engines
6.2. Engines with system of injection of fuel
6.2.1. Specifications
6.2.2. Air filter
6.2.3. Cable of the drive of a butterfly valve
6.2.4. Pedal of management of a butterfly valve
6.2.5. Fuel
6.2.6. System of injection of fuel
6.2.7. Decompression of fuel system
6.2.8. Fuel pump
6.2.9. Fuel level sensor
6.2.10. Fuel tank
6.2.11. System of injection of fuel
6.2.12. Case of a butterfly valve
6.2.13. Units of system of injection of fuel
6.2.14. The soaking-up collector
6.2.15. Final collector
6.2.16. Exhaust system
6.3. System of food / production of the fulfilled gases
6.4. System of decrease in toxicity of the fulfilled gases
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment


6.2.15. Final collector


1. Disconnect the socket of the sensor of exhaust gases from conducting.
2. Turn off bolts and remove a collector casing.
3. Turn off a nut of the union and pick up the recirculation phone.
4. Include on the emergency brake and lift a forward part of the car.
5. Turn off nuts and a bolt and remove a reception exhaust pipe, remove laying.
6. Turn off nuts and bolts of fastening of a final collector to a head of the block of cylinders in the return sequence.
7. Remove a collector and laying.


1. Installation is carried out upside-down.
2. Before assembly replace all laying, having carefully cleared the demountable planes, replace or restore the damaged hairpins.
3. Tighten bolts and nuts a dynamometer key in the specified sequence.

6.2.14. The soaking-up collector

6.2.16. Exhaust system