Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
6.1. Carburetor engines
6.2. Engines with system of injection of fuel
6.3. System of food / production of the fulfilled gases
6.3.1. Models with single-point electronic injection of fuel
6.3.2. Models with multipoint electronic injection of fuel
6.3.2.1. Technical characteristics
6.3.2.2. Air filter
6.3.2.3. Accelerator rope
6.3.2.4. Accelerator pedal
6.3.2.5. System of injection of fuel
6.3.2.6. Fuel system
6.3.2.7. Fuel pump
6.3.2.8. Fuel level sensor
6.3.2.9. Fuel tank
6.3.2.10. Case of a butterfly valve
6.3.2.11. Elements of system of injection of fuel (1,6 l engines)
6.3.2.11.1. Fuel collector and fuel injectors
6.3.2.11.2. Fuel pressure regulator
6.3.2.11.3. Potentiometer of a butterfly valve
6.3.2.11.4. Additional valve of air supply
6.3.2.11.5. Air stream sensor
6.3.2.11.6. Electromagnetic valve of bystry operation of the engine
6.3.2.11.7. The temperature valve of the accelerated warming up of the engine
6.3.2.11.8. Sensor of an angle of rotation of a bent shaft and transistor of power
6.3.2.11.9. Sensor of temperature of cooling liquid
6.3.2.11.10. Engine electronic control unit
6.3.2.11.11. Switch of neutral transfer
6.3.2.11.12. Switch of blocking of starters / lamps of a backing
6.3.2.11.13. Relay of an electronic control unit of the engine and fuel pump
6.3.2.11.14. The switch in system of strengthening of steering
6.3.2.11.15. The switch in the air conditioning system
6.3.2.11.16. Sensor of speed of the movement of the car
6.3.2.12. Elements of system of injection of fuel (2,0 l engines)
6.3.2.13. Inlet collector
6.4. System of decrease in toxicity of the fulfilled gases
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 






Discover hidden cinematic treasures and cult classics on Soap2day.



6-3-2-11-7-temperaturnyjj-klapan-uskorennogo-progreva-dvigatelya.html

6.3.2.11.7. The temperature valve of the accelerated warming up of the engine


The temperature valve of the accelerated warming up of the engine is installed on the left side of the case of a butterfly valve.

Before its removal, disconnect a wire of the negative plug of the accumulator.

Removal and installation
PERFORMANCE ORDER
1. Remove the air filter, being guided by the instructions provided subsection 6.3.2.2.
2. Turn off and remove a nut and a washer, then, remove a fixing plate of a cam of bystry idling, a spring, a washer and the lever, having remembered as they were established.
3. Turn off the fixing screw and remove a fixing plate of the valve. Get the valve and remove its sealing ring.
4. Installation is carried out upside-down removals. At installation use a new sealing ring and check that all elements of the connecting mechanism were correctly established.

6.3.2.11.6. Electromagnetic valve of bystry operation of the engine
6.3.2.11.8. Sensor of an angle of rotation of a bent shaft and transistor of power