Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
12.1. Specifications
12.2. Bearings of naves of forward wheels
12.3. Rack of a forward suspension bracket
12.4. Lower lever
12.5. Spherical support of the lower lever
12.6. Stabilizer of cross stability of a forward suspension bracket
12.7. Bearings of back wheels
12.8. Details of a back suspension bracket
12.8.1. Rack of a back suspension bracket
12.8.2. Levers of a back suspension bracket
12.8.3. Bars
12.8.4. Nave case
12.8.5. Stabilizer of cross stability of a back suspension bracket
12.9. Wheel
12:10. Switch of ignition and lock of blocking of a steering column
12:11. Steering column
12:12. Steering mechanism
12:13. Covers of steering transfer
12:14. Hydraulic actuator
12:15. Pump of the hydraulic booster
12:16. Tips of steering draft
13. Body
14. Electric equipment
 


12-8-3-shtangi.html

12.8.3. Bars

Removal

PERFORMANCE ORDER
1. Lift a back part of the car and establish on supports.
2. Remove a wheel.
3. Turn off a bar nut on the case of a nave and remove a washer.
4. Turn off a nut (it is specified by shooters) bars on an arm of a body and remove a bar.

Check

PERFORMANCE ORDER
1. Check a bar and plugs.
2. Bars change only assembled with plugs.

Installation

PERFORMANCE ORDER
1. Install a bar on a hairpin in the case of a nave and screw a new nut.
2. Establish a bar on an arm, pass a bolt and screw a new nut.
3. Establish a wheel and lower the car.
4. Roll the car forward and back, shake up – down.
5. Tighten all nuts with the set moment.

12.8.2. Levers of a back suspension bracket
12.8.4. Nave case